AT3035 CARDIOID CONDENSER MICROPHONE
Click on the picture below to get more information on the Audio Technica AT3035 microphone:
 AUDIO TECHNICA - AT3035 CARDIOID CONDENSER MICROPHONE |
Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. Along with its rugged construction and high-performance specifications, the AT3035 provides an exceptional level of consistency from model to model.
- Custom-engineered large diaphragm for exceptional detail and low noise
- Cardioid polar pattern reduces pickup of sounds from the sides and rear,
improving isolation of desired sound source
- High max SPL, wide dynamic range and optimized output level provide
unmatched versatility
- Low self-noise (12 dB SPL) – perfectly suited for today's most sophisticated
digital recording equipment
- Extended low-frequency response for rich, full sound
- State-of-the-art surface-mount electronics ensure compliance with A-T's
stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
SPECIFICATIONS |
|
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
|
|
|
| POLAR PATTERN | Cardioid |
|
|
|
| FREQUENCY RESPONSE | 20-20,000 Hz |
|
|
|
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
|
|
|
| OPEN CIRCUIT SENSITIVITY | -32 dB (25.1 mV) re 1V at 1 Pa |
|
|
|
| IMPEDANCE | 250 ohms |
|
|
|
| MAXIMUM INPUT SOUND LEVEL | 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) |
|
|
|
| NOISE | 12 dB SPL |
|
|
|
| DYNAMIC RANGE (typical) | 136 dB, 1 kHz at Max SPL |
|
|
|
| SIGNAL-TO-NOISE RATIO | 82 dB, 1 kHz at 1 Pa |
|
|
|
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 3 mA typical |
|
|
|
| SWITCHES | Flat, roll-off; 10 dB pad (nominal) |
|
|
|
| WEIGHT | 13.8 oz (390 g) |
|
|
|
| DIMENSIONS | 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter |
|
|
|
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
|
|
|
| ACCESSORIES FURNISHED | AT8458 shock mount for 5/8"-27 threaded stands; soft protective pouch |
|
|
|
| AUDIO-TECHNICA CASE STYLE | R5 |
|
|
|
SPECIFICATION GRAPHS |
||
| Click on the chart to view the larger image | ||
 |
||
 |
||
The Sound Professionals carry the widest selection and have the lowest prices on Audio Technica AT3035 microphones.